May 27th, 2008
Hung Left Wing on Stand

I built the 5" support angle and attached it to the end spar using #10 bolts.

Here's what the end looks like.

The left wing is in place on the stand. I spent a lot of time getting everything level and squared away.

I built some simple wing jacks using 3/8" threaded bar, nuts, washers and 2x4 scraps.

With the threaded rod inserted into the 2x4, I can adjust them up or down but turning the nut.

Here is a shot after the wing was leveled using the fishing line trick as stated in the manual.